Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F Revision B
APPENDIX Fax Unit System 657
REPORT
Table 7-20. List of System Parameter (Report)
Label
Maintenance
Code
User
Access
Internal
Address
Description Setting Value Default Remarks
Main Sub
REP_MONITOR_OUT 100 001
---
0F0
Monitor report automatic printing
Disabled (it is included in transmission report)
0 : OFF
1 : ON
OFF
(0)
Not used
REP_DOHO_OUT 100 007
{
0F1
Multiple transmission report automatic printing 0 = Not print
1 = Print only when failed to transmit
2 = Print
Not print
(0)
---
REP_TX_OUT 100 008
{
0F2
Transmission report automatic printing 0 = Not print
1 = Print only when an error occurs
2 = Print
Not print
(0)
---
REP_ACTIV_OUT 100 009
{
0F3
Activity report automatic printing 0 = Not print
1 = Print
Not print
(0)
---
REP_PROTOCOL_OUT 330 001
---
0F4
Protocol monitor report automatic printing 0 = Not print
1 = Print only when an error occurs
2 = Print
Not print
(0)
---
REP_SEL_OPP_NAME 310 003
---
0F5
The second priority for “Name of The Other End” on the activity report
Select which to be printed at “Name of The Other End” column on the
activity report as the second priority, name (which sent from the other end)
or phone number.
0 = Name
1 = Phone number
Phone
number
(1)
Fixed to 1
REP_SEND_ALL 330 002
---
0F6
Transferring size for printing report
The ASIC transfers data for printing report so that it fits within a standard
(letter) sized paper.
0 = Transfers all data
1 = Transfers data so that it fits within a
standard (letter) sized paper
Transfers all
data
(0)
---

Epson AcuLaser CX11 Specifications

General

Brand	Epson
Model	AcuLaser CX11
Category	All in One Printer
Language	English