Epson AcuLaser CX11 - Page 258

EPSON AcuLaser CX11/CX11F Revision B
TROUBLESHOOTING Printer 260
10
Check of image secondary transfer process
Is the toner image on IBT BELT transferred
normally to the paper?
Execute a test print, turn the power OFF when
you think that the image transfer process is in
progress during printing, and check the paper.
Go to Step [11]. Replace LV/
HVPS. (p.435)
11
Check of Heat Roll and Pressure Roll
Allow FUSER ASSY to cool down
before performing work.
Remove FUSER ASSY. (p.415)
Turn the Gear by hand, and inspect Heat Roll
and Pressure Roll.
Are Heat Roll and Pressure Roll scratched or
dirty and damaged?
Replace FUSER
ASSY. (p.415)
Replace “ESS and
possible parts that
caused the error”.
Step Check Yes No
W A R N I N G
manuals4you.commanuals4you.com