EPSON AcuLaser CX11/CX11F Revision B
DISASSEMBLY AND ASSEMBLY Overview 301
W A R N I N G
îš„ Be careful not to let the developer or toner get into your eye or
mouth, and not to inhale it. And also care should be taken for
people around you to prevent them from the same thing.
(Spread a sheet of paper inside and around the printer to
prevent soiling.)
îš„ Since there are many different screws, use them in correct
positions. Be extremely careful of the difference between the
screws for resin and those for sheet metal. If the screw for resin
is mistaken for the screw for sheet metal, its threads will be
broken, leading to a crushed screw hole or trouble.
îš„ Do not pick up the spilt toner with a vacuum cleaner (for home
use). To do so may cause the sucked toner particles to catch fire
by sparks of the electric contacts. If the toner has spilt on the
floor, etc., clean it with a broom or wipe it with a cloth
moistened with neural detergent. If it is necessary to clean a lot
of spilt toner with a cleaner, use a cleaner exclusively designed
for toner.
Leg_Sec001_014EA
W A R N I N G
îš„ Use only recommended tools for disassembling, assembling or
adjusting the printer.
îš„ Apply lubricants and adhesives as specified.
îš„ Make the specified adjustments when you disassemble the
printer. (Refer to Chapter5 for details.)
To Next Page
Loading...
Need help?
General
