Epson AcuLaser CX11 - Page 317

EPSON AcuLaser CX11/CX11F Revision B
DISASSEMBLY AND ASSEMBLY Printer 319
REINSTALLATION
1. Match the boss on COVER FRONT ASSY U with the holes on COVER FRONT
L while bending down COVER FRONT ASSY U, and attach COVER FRONT
ASSY U to COVER FRONT L.
2. Match the two hooks on the rear of COVER FRONT L with the holes on the main
unit, and attach COVER FRONT L together with COVER FRONT ASSY U.
3. Fasten COVER FRONT L to the main unit with the 3 screws (silver, with flange, 8
mm).
4. Attach COVER MSI. (p317)
5. Attach COVER ASSY LH. (p321)
6. Attach COVER ASSY RH. (p326)
C A U T I O N
When performing the following work, take care not to damage the
COVER FRONT ASSY U boss.