Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F Revision B
DISASSEMBLY AND ASSEMBLY Printer 341
REINSTALLATION
1. Match the left and right U grooves of PLATE ASSY RETARD with the bosses on
the front of FRAME ASSY BOTTOM.
2. Turn the bosses aligned with the U-grooves as the fulcrum while bending down
PLATE ASSY RETARD, insert the bosses on the rear side of FRAME ASSY
BOTTOM into the left and right holes of PLATE ASSY RETARD, and attach
PLATE ASSY RETARD.
3. Attach HOLDER ASSY RETARD MSI. (p338)
4. Attach ROLL MSI. (p333)
5. Attach CHUTE MSI. (p334)
6. Attach FRAME ASSY-PH. (p352)
Figure 4-35. Reinstallation of PLATE ASSY RETARD
C A U T I O N
When performing the following work, do not fold or bend PLATE
ASSY RETARD.
Leg_Sec03_509EA
[1)]
[2)-1]
[2)-2]
[2)-1]

Epson AcuLaser CX11 Specifications

General

Brand	Epson
Model	AcuLaser CX11
Category	All in One Printer
Language	English