Epson AcuLaser CX11 - Page 453

EPSON AcuLaser CX11/CX11F Revision B
DISASSEMBLY AND ASSEMBLY Printer 455
4.2.12.13 SOLENOID FEED
REMOVAL
1. Remove COVER LEFT 500. (p449)
2. Remove CLUTCH ASSY FEED. (p457)
3. Remove DRIVE ASSY FEED. (p454)
4. Remove the screw (silver, 6 mm) fastening SOLENOID FEED to DRIVE ASSY
FEED.
5. Remove SOLENOID FEED from DRIVE ASSY FEED.
REINSTALLATION
1. Match the hole on SOLENOID FEED with the boss on DRIVE ASSY FEED.
2. Fasten SOLENOID FEED to DRIVE ASSY FEED with the screw (silver, 6 mm).
3. Attach DRIVE ASSY FEED. (p454)
4. Attach CLUTCH ASSY FEED. (p457)
5. Attach COVER LEFT 500. (p449)
Figure 4-132. Removal of SOLENOID FEED
Leg_Sec03_024FA
3)
5)
4)