222 System Utility and Clear Commands
nvram:startup-
log
url
Uploads the startup log file.
nvram:traplog
url
Copies the trap log file to a server.
system:running-
config
nvram:startup
-config
Saves the running configuration to
NVRAM.
system:running-
config
nvram:factory
-defaults
Saves the running configuration to
NVRAM to the
factory-defaults
file.
system:image url
Saves the system image to a server.
url nvram:applica
tion
destfilename
Destination file name for the
application file.
url
nvram:clibann
er
Downloads the CLI banner to the
system.
url
nvram:fastpat
h.cfg
Downloads the binary config file to
the system.
url nvram:publick
ey-config
Downloads the Public Key for
Configuration Script validation.
url nvram:publick
ey-image
Downloads Public Key for Image
validation.
url
nvram:script
destfilename
Downloads a configuration script file
to the system. During the download
of a configuration script, the copy
command validates the script. In case
of any error, the command lists all
the lines at the end of the validation
process and prompts you to confirm
before copying the script file.
url
nvram:script
destfilename
noval
When you use this option, the copy
command will not validate the
downloaded script file. An example
of the CLI command follows:
Source Destination Description
To Next Page
Loading...
