NetApp CN1610 - Page 226

Chapter 4: Utility Commands 223
The following shows an example of downloading and applying ias users file.
(CN1610) #copy tftp://10.131.17.104/aaa_users.txt ias-users
Mode........................................... TFTP
Set Server IP.................................. 10.131.17.104
Path........................................... ./
Filename....................................... aaa_users.txt
Data Type...................................... IAS Users
(CN1610) #copy tftp://1.1.1.1/file.scr nvram:script file.scr
noval
url nvram:sshkey-
dsa
Downloads an SSH key file. For
more information, see “Secure Shell
Commands” on page 47.
url nvram:sshkey-
rsa1
Downloads an SSH key file.
url nvram:sshkey-
rsa2
Downloads an SSH key file.
url nvram:startup
-config
Downloads the startup configuration
file to the system.
url ias-users
Downloads an IAS users database
file to the system. When the IAS
users file is downloaded, the switch
IAS user’s database is replaced with
the users and their attributes
available in the downloaded file.
url {active |
backup}
Download an image from the remote
server to either image.
{active |
backup}
url
Upload either image to the remote
server.
active backup
Copy the active image to the backup
image.
backup active
Copy the backup image to the active
image.
Source Destination Description