334 Spanning Tree Protocol Commands
Mode ◆ Privileged EXEC
◆ User EXEC
Term Definition
Bridge Priority Specifies the bridge priority for the Common and
Internal Spanning tree (CST). The value lies
between 0 and 61440. It is displayed in multiples of
4096.
Bridge Identifier The bridge identifier for the CST. It is made up using
the bridge priority and the base MAC address of the
bridge.
Time Since Topology
Change
Time in seconds.
Topology Change
Count
Number of times changed.
Topology Change in
Progress
Boolean value of the Topology Change parameter
for the switch indicating if a topology change is in
progress on any port assigned to the common and
internal spanning tree.
Designated Root The bridge identifier of the root bridge. It is made up
from the bridge priority and the base MAC address
of the bridge.
Root Path Cost Value of the Root Path Cost parameter for the
common and internal spanning tree.
Root Port Identifier Identifier of the port to access the Designated Root
for the CST
Bridge Max Age Derived value.
Bridge Max Hops Bridge max-hops count for the device.
Root Port Bridge
Forward Delay
Derived value.
Hello Time Configured value of the parameter for the CST.
To Next Page
Loading...
