Chapter 5: Switching Commands 335
The following shows example CLI display output for the command.
(CN1610) #show spanning-tree
Bridge Priority................................ 32768
Bridge Identifier..............................
80:00:00:10:18:48:FC:07
Time Since Topology Change..................... 8 day 3 hr 22 min
37 sec
Topology Change Count.......................... 0
Topology Change in progress.................... FALSE
Designated Root................................
80:00:00:10:18:48:FC:07
Root Path Cost................................. 0
Root Port Identifier........................... 00:00
Bridge Max Age................................. 20
Bridge Max Hops................................ 20
Bridge Tx Hold Count........................... 6
Bridge Forwarding Delay........................ 15
Hello Time..................................... 2
Bridge Hold Time............................... 6
CST Regional Root..............................
80:00:00:10:18:48:FC:07
Regional Root Path Cost........................ 0
Associated FIDs Associated VLANs
--------------- ----------------
Bridge Hold Time Minimum time between transmission of
Configuration Bridge Protocol Data Units (BPDUs).
CST Regional Root Bridge Identifier of the CST Regional Root. It is
made up using the bridge priority and the base MAC
address of the bridge.
Regional Root Path
Cost
Path Cost to the CST Regional Root.
Associated FIDs List of forwarding database identifiers currently
associated with this instance.
Associated VLANs List of VLAN IDs currently associated with this
instance.
Term Definition
To Next Page
Loading...
