672 IP Access Control List Commands
Starting Destination
L4 port
The starting destination layer 4 port.
Ending Destination
L4 port
The ending destination layer 4 port.
ICMP Code
This is shown only if the protocol is ICMP.
The ICMP message code for this rule.
Fragments If the ACL rule matches on fragmented IP packets.
Committed Rate The committed rate defined by the rate-limit
attribute.
Committed Burst Size The committed burst size defined by the rate-limit
attribute.
Source IP Address The source IP address for this rule.
Source IP Mask The source IP Mask for this rule.
Source L4 Port
Keyword
The source port for this rule.
Destination IP
Address
The destination IP address for this rule.
Destination IP Mask The destination IP Mask for this rule.
Destination L4 Port
Keyword
The destination port for this rule.
IP DSCP The value specified for IP DSCP.
IP Precedence The value specified IP Precedence.
IP TOS The value specified for IP TOS.
Log Displays when you enable logging for the rule.
Assign Queue The queue identifier to which packets matching this
rule are assigned.
Term Definition
To Next Page
Loading...
