Obsolete and Discontinued Commands 35
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 1065
:HARDcopy:PDRiver
(see page 1138)
Command Syntax
:HARDcopy:PDRiver <driver>
<driver> ::= {AP2Xxx | AP21xx | {AP2560 | AP25} | {DJ350 | DJ35} |
DJ6xx | {DJ630 | DJ63} | DJ6Special | DJ6Photo |
DJ8Special | DJ8xx | DJ9Vip | OJPRokx50 | DJ9xx | GVIP |
DJ55xx | {PS470 | PS47} {PS100 | PS10} | CLASer |
MLASer | LJFastraster | POSTscript}
The HARDcopy:PDRiver command sets the hardcopy printer driver used
for the selected printer.
If the correct driver for the selected printer can be identified, it will be
selected and cannot be changed.
Query Syntax
:HARDcopy:PDRiver?
The :HARDcopy:PDRiver? query returns the selected hardcopy printer
driver.
Return Format
<driver><NL>
<driver> ::= {AP2X | AP21 | AP25 | DJ35 | DJ6 | DJ63 | DJ6S | DJ6P |
DJ8S | DJ8 | DJ9V | OJPR | DJ9 | GVIP | DJ55 | PS10 |
PS47 | CLAS | MLAS | LJF | POST}
See Also • "Introduction to :HARDcopy Commands" on page 358
The :HARDcopy:PDRiver command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :HARDcopy:APRinter (see page 360) command instead.
To Next Page
Loading...
