502 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
22 :MTESt Commands
:MTESt:COUNt:TIME
(see page 1138)
Query Syntax
:MTESt:COUNt:TIME?
The :MTESt:COUNt:TIME? query returns the elapsed time in the current
mask test run.
Return Format
<time><NL>
<time> ::= elapsed seconds in NR3 format.
See Also • "Introduction to :MTESt Commands" on page 491
• ":MTESt:COUNt:WAVeforms" on page 503
• ":MTESt:COUNt:FWAVeforms" on page 500
• ":MTESt:COUNt:RESet" on page 501
Example Code • "Example Code" on page 491
To Next Page
Loading...
