Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:SBUS<n> Commands 27
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 753
:SBUS<n>:SPI:WIDTh
(see page 1138)
Command Syntax
:SBUS<n>:SPI:WIDTh <word_width>
<word_width> ::= integer 4-16 in NR1 format
The :SBUS<n>:SPI:WIDTh command determines the number of bits in a
word of data for SPI.
Query Syntax
:SBUS<n>:SPI:WIDTh?
The :SBUS<n>:SPI:WIDTh? query returns the current SPI decode word
width.
Return Format
<word_width><NL>
<word_width> ::= integer 4-16 in NR1 format
Errors • "- 241, Hardware missing" on page 1099
See Also • "Introduction to :SBUS<n> Commands" on page 629
• ":SBUS<n>:MODE" on page 633
• ":SBUS<n>:SPI Commands" on page 738

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English