Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:WMEMory<r> Commands 34
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 1037
:WMEMory<r>:LABel
(see page 1138)
Command Syntax
:WMEMory<r>:LABel <string>
<r> ::= 1-2 in NR1 format
<string> ::= quoted ASCII string
The :WMEMory<r>:LABel command sets the reference waveform label to
the string that follows.
Setting a label for a reference waveform also adds the name to the label
list in non- volatile memory (replacing the oldest label in the list).
Query Syntax
:WMEMory<r>:LABel?
The :WMEMory<r>:LABel? query returns the label associated with a
particular reference waveform.
Return Format
<string><NL>
<string> ::= quoted ASCII string
See Also • Chapter 34, “:WMEMory<r> Commands,” starting on page 1033
• ":WMEMory<r>:DISPlay" on page 1036
NOTE
Label strings are 10 characters or less, and may contain any commonly used ASCII
characters. Labels with more than 10 characters are truncated to 10 characters. Lower case
characters are converted to upper case.

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English