Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

536 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
24 :POWer Commands
:POWer:ENABle
(see page 1138)
Command Syntax
:POWer:ENABle {{0 | OFF} | {1 | ON}}
The :POWer:ENABle command enables or disables power analysis.
Query Syntax
:POWer:ENABle?
The :POWer:ENABle query returns a 1 or a 0 showing whether power
analysis is enabled or disabled, respectively.
Return Format
{0 | 1}
See Also • Chapter 21, “:MEASure Power Commands,” starting on page 469

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English