Agilent Technologies InfiniiVision 3000 X-Series

152 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:WAVeform:VIEW <view>
(see page 988)
:WAVeform:VIEW? (see
page 988)
<view> ::= {MAIN}
n/a :WAVeform:XINCrement?
(see page 989)
<return_value> ::= x-increment
in the current preamble in NR3
format
n/a :WAVeform:XORigin?
(see page 990)
<return_value> ::= x-origin
value in the current preamble in
NR3 format
n/a :WAVeform:XREFerence?
(see page 991)
<return_value> ::= 0
(x-reference value in the current
preamble in NR1 format)
n/a :WAVeform:YINCrement?
(see page 992)
<return_value> ::= y-increment
value in the current preamble in
NR3 format
n/a :WAVeform:YORigin?
(see page 993)
<return_value> ::= y-origin in
the current preamble in NR3
format
n/a :WAVeform:YREFerence?
(see page 994)
<return_value> ::= y-reference
value in the current preamble in
NR1 format
Table 61 :WAVeform Commands Summary (continued)
Command Query Options and Query Returns
Table 62 :WGEN Commands Summary
Command Query Options and Query Returns
:WGEN:ARBitrary:BYTeo
rder <order> (see
page 999)
:WGEN:ARBitrary:BYTeo
rder? (see page 999)
<order> ::= {MSBFirst | LSBFirst}
:WGEN:ARBitrary:DATA
{<binary> | <value>,
<value> ...} (see
page 1000)
n/a <binary> ::= single-presision
floating point values between
-1.0 to +1.0 in IEEE 488.2 binary
block format
<value> ::= floating point values
between -1.0 to +1.0 in
comma-separated format
n/a :WGEN:ARBitrary:DATA:
ATTRibute:POINts?
(see page 1001)
<points> ::= number of points in
NR1 format
:WGEN:ARBitrary:DATA:
CLEar (see page 1002)
n/a n/a