Agilent Technologies InfiniiVision 3000 X-Series

788 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
28 :SEARch Commands
:SEARch:GLITch:POLarity
(see page 1138)
Command Syntax
:SEARch:GLITch:POLarity <polarity>
<polarity> ::= {POSitive | NEGative}
The :SEARch:GLITch:POLarity command sets the polarity for the glitch
(pulse width) search.
Query Syntax
:SEARch:GLITch:POLarity?
The :SEARch:GLITch:POLarity? query returns the current polarity setting
for the glitch (pulse width) search.
Return Format
<polarity><NL>
<polarity> ::= {POS | NEG}
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:MODE" on page 780
• ":SEARch:GLITch:SOURce" on page 791