Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

612 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
26 :SAVE Commands
:SAVE:IMAGe:FORMat
(see page 1138)
Command Syntax
:SAVE:IMAGe:FORMat <format>
<format> ::= {{BMP | BMP24bit} | BMP8bit | PNG}
The :SAVE:IMAGe:FORMat command sets the image format type.
Query Syntax
:SAVE:IMAGe:FORMat?
The :SAVE:IMAGe:FORMat? query returns the selected image format type.
Return Format
<format><NL>
<format> ::= {BMP | BMP8 | PNG | NONE}
When NONE is returned, it indicates that a waveform data file format is
currently selected.
See Also • "Introduction to :SAVE Commands" on page 607
• ":SAVE:IMAGe[:STARt]" on page 610
• ":SAVE:IMAGe:FACTors" on page 611
• ":SAVE:IMAGe:INKSaver" on page 613
• ":SAVE:IMAGe:PALette" on page 614
• ":SAVE:WAVeform:FORMat" on page 622

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English