Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

344 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
16 :FUNCtion Commands
:FUNCtion:LINear:GAIN
(see page 1138)
Command Syntax
:FUNCtion:LINear:GAIN <value>
<value> ::= 'A' in Ax + B, value in NR3 format
The :FUNCtion:LINear:GAIN command specifies the 'A' value in the Ax + B
operation.
This command is available with the DSOX3ADVMATH advanced math
license.
Query Syntax
:FUNCtion:LINear:GAIN?
The :FUNCtion:LINear:GAIN query returns the gain value.
Return Format
<value><NL>
<value> ::= 'A' in Ax + B, value in NR3 format
See Also • ":FUNCtion:OPERation" on page 347

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English