Agilent Technologies InfiniiVision 3000 X-Series - Learn Rear Panel Connectors

44 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
1 What's New
Version 1.00 at Introduction
The Agilent InfiniiVision 3000 X-Series oscilloscopes were introduced with
version 1.00 of oscilloscope operating software.
The command set is most closely related to the InfiniiVision 7000B Series
oscilloscopes (and the 7000A Series, 6000 Series, and 54620/54640 Series
oscilloscopes before them). For more information, see “Command
Differences From 7000B Series Oscilloscopes" on page 45.