Agilent Technologies InfiniiVision 3000 X-Series

:SBUS<n> Commands 27
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 639
:SBUS<n>:A429:COUNt:RESet
(see page 1138)
Command Syntax
:SBUS<n>:A429:COUNt:RESet
Resets the word and error counters.
Errors • "- 241, Hardware missing" on page 1099
See Also • ":SBUS<n>:A429:COUNt:WORD" on page 640
• ":SBUS<n>:A429:COUNt:ERRor" on page 638
• "Introduction to :SBUS<n> Commands" on page 629
• ":SBUS<n>:MODE" on page 633
• ":SBUS<n>:A429 Commands" on page 634