Agilent Technologies InfiniiVision 3000 X-Series

:MEASure Commands 20
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 451
:MEASure:STATistics:RSDeviation
(see page 1138)
Command Syntax
:MEASure:STATistics:RSDeviation {{0 | OFF} | {1 | ON}}
The :MEASure:STATistics:RSDeviation command disables or enables
relative standard deviations, that is, standard deviation/mean, in the
measurement statistics.
Query Syntax
:MEASure:STATistics:RSDeviation?
The :MEASure:STATistics:RSDeviation? query returns the current relative
standard deviation setting.
Return Format
{0 | 1}<NL>
See Also • "Introduction to :MEASure Commands" on page 406
• ":MEASure:RESults" on page 438
• ":MEASure:STATistics" on page 446
• ":MEASure:STATistics:DISPlay" on page 447
• ":MEASure:STATistics:MCOunt" on page 449
• ":MEASure:STATistics:RESet" on page 450
• ":MEASure:STATistics:INCRement" on page 448