366 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
17 :HARDcopy Commands
:HARDcopy:NETWork:APPLy
(see page 1138)
Command Syntax
:HARDcopy:NETWork:APPLy
The :HARDcopy:NETWork:APPLy command applies the network printer
settings and makes the printer connection.
See Also • "Introduction to :HARDcopy Commands" on page 358
• ":HARDcopy:NETWork:SLOT" on page 369
• ":HARDcopy:NETWork:ADDRess" on page 365
• ":HARDcopy:NETWork:DOMain" on page 367
• ":HARDcopy:NETWork:USERname" on page 370
• ":HARDcopy:NETWork:PASSword" on page 368
To Next Page
Loading...
