Agilent Technologies InfiniiVision 3000 X-Series

:HARDcopy Commands 17
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 365
:HARDcopy:NETWork:ADDRess
(see page 1138)
Command Syntax
:HARDcopy:NETWork:ADDRess <address>
<address> ::= quoted ASCII string
The :HARDcopy:NETWork:ADDRess command sets the address for a
network printer slot. The address is the server/computer name and the
printer's share name in the \\server\share format.
The network printer slot is selected by the :HARDcopy:NETWork:SLOT
command.
To apply the entered address, use the :HARDcopy:NETWork:APPLy
command.
Query Syntax
:HARDcopy:NETWork:ADDRess?
The :HARDcopy:NETWork:ADDRess? query returns the specified address
for the currently selected network printer slot.
Return Format
<address><NL>
<address> ::= quoted ASCII string
See Also • "Introduction to :HARDcopy Commands" on page 358
• ":HARDcopy:NETWork:SLOT" on page 369
• ":HARDcopy:NETWork:APPLy" on page 366
• ":HARDcopy:NETWork:DOMain" on page 367
• ":HARDcopy:NETWork:USERname" on page 370
• ":HARDcopy:NETWork:PASSword" on page 368