Agilent Technologies InfiniiVision 3000 X-Series

338 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
16 :FUNCtion Commands
:FUNCtion:FREQuency:HIGHpass
(see page 1138)
Command Syntax
:FUNCtion:FREQuency:HIGHpass <3dB_freq>
<3dB_freq> ::= -3dB cutoff frequency value in NR3 format
The :FUNCtion:FREQuency:HIGHpass command sets the high- pass filter's
-3 dB cutoff frequency.
The high- pass filter is a single- pole high pass filter.
This command is available with the DSOX3ADVMATH advanced math
license.
Query Syntax
:FUNCtion:FREQuency:HIGHpass?
The :FUNCtion:FREQuency:HIGHpass query returns the high- pass filter's
cutoff frequency.
Return Format
<3dB_freq><NL>
<3dB_freq> ::= -3dB cutoff frequency value in NR3 format
See Also • ":FUNCtion:OPERation" on page 347