Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:SEARch Commands 28
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 803
:SEARch:SERial:A429:LABel
(see page 1138)
Command Syntax
:SEARch:SERial:A429:LABel <value>
<value> ::= 8-bit integer in decimal, <hex>, <octal>, or <string>
from 0-255
<hex> ::= #Hnn where n ::= {0,..,9 | A,..,F}
<octal> ::= #Qnnn where n ::= {0,..,7}
<string> ::= "0xnn" where n::= {0,..,9 | A,..,F}
The :SEARch:SERial:A429:LABel command defines the ARINC 429 label
value when labels are used in the selected search mode.
Query Syntax
:SEARch:SERial:A429:LABel?
The :SEARch:SERial:A429:LABel? query returns the current label value in
decimal format.
Return Format
<value><NL> in decimal format
Errors • "- 241, Hardware missing" on page 1099
See Also • "Introduction to :TRIGger Commands" on page 877
• ":SEARch:SERial:A429:MODE" on page 804

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English