:POWer Commands 24
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 545
:POWer:HARMonics:STATus
(see page 1138)
Query Syntax
:POWer:HARMonics:STATus?
The :POWer:HARMonics:STATus query returns the overall pass/fail status
of the current harmonics analysis.
Return Format
<status> ::= {PASS | FAIL | UNTested}
See Also • ":POWer:HARMonics:RUNCount" on page 543
• ":POWer:HARMonics:FAILcount" on page 540
• ":POWer:HARMonics:APPLy" on page 537
• ":POWer:HARMonics:DATA" on page 538
• ":POWer:HARMonics:DISPlay" on page 539
• ":POWer:HARMonics:LINE" on page 541
• ":POWer:HARMonics:POWerfactor" on page 542
• ":POWer:HARMonics:STANdard" on page 544
• ":POWer:HARMonics:THD" on page 546
To Next Page
Loading...
