Agilent Technologies InfiniiVision 3000 X-Series

:CALibrate Commands 9
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 259
:CALibrate:TEMPerature
(see page 1138)
Query Syntax
:CALibrate:TEMPerature?
The :CALibrate:TEMPerature? query returns the change in temperature
since the last user calibration procedure.
Return Format
<return value><NL>
<return value> ::= degrees C delta since last cal in NR3 format
See Also • "Introduction to :CALibrate Commands" on page 251