Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:SEARch Commands 28
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 805
:SEARch:SERial:A429:PATTern:DATA
(see page 1138)
Command Syntax
:SEARch:SERial:A429:PATTern:DATA <string>
<string> ::= "nn...n" where n ::= {0 | 1}, length depends on FORMat
The :SEARch:SERial:A429:PATTern:DATA command defines the ARINC 429
data pattern resource according to the string parameter. This pattern
controls the data pattern searched for in each ARINC 429 word.
Query Syntax
:SEARch:SERial:A429:PATTern:DATA?
The :SEARch:SERial:A429:PATTern:DATA? query returns the current
settings of the specified ARINC 429 data pattern resource in the binary
string format.
Return Format
<string><NL>
Errors • "- 241, Hardware missing" on page 1099
See Also • "Introduction to :TRIGger Commands" on page 877
• ":SEARch:SERial:A429:MODE" on page 804
• ":SEARch:SERial:A429:PATTern:SDI" on page 806
• ":SEARch:SERial:A429:PATTern:SSM" on page 807
NOTE
If more bits are sent for <string> than specified by the :SBUS<n>:A429:FORMat command,
the most significant bits will be truncated.

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English