To Next Page

To Previous Page

:FUNCtion Commands 16

Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 333

:FUNCtion:DISPlay

(see page 1138)

Command Syntax

:FUNCtion:DISPlay <display>

<display> ::= {{1 | ON} | {0 | OFF}}

The :FUNCtion:DISPlay command turns the display of the function on or

off. When ON is selected, the function performs as specified using the

other FUNCtion commands. When OFF is selected, function is neither

calculated nor displayed.

Query Syntax

:FUNCtion:DISPlay?

The :FUNCtion:DISPlay? query returns whether the function display is on

or off.

Return Format

<display> ::= {1 | 0}

See Also • "Introduction to :FUNCtion Commands" on page 326

• ":VIEW" on page 225

• ":BLANk" on page 198

• ":STATus" on page 222

Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 3000 X-Series