:SEARch Commands 28
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 791
:SEARch:GLITch:SOURce
(see page 1138)
Command Syntax
:SEARch:GLITch:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :SEARch:GLITch:SOURce command selects the channel on which to
search for glitches (pulse widths).
Query Syntax
:SEARch:GLITch:SOURce?
The :SEARch:GLITch:SOURce? query returns the current pulse width
source.
If all channels are off, the query returns "NONE."
Return Format
<source><NL>
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:MODE" on page 780
• ":SEARch:GLITch:POLarity" on page 788
• ":SEARch:GLITch:QUALifier" on page 789
• ":SEARch:GLITch:RANGe" on page 790
To Next Page
Loading...
