Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:WGEN Commands 33
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 1011
:WGEN:FUNCtion:RAMP:SYMMetry
(see page 1138)
Command Syntax
:WGEN:FUNCtion:RAMP:SYMMetry <percent>
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
For Ramp waveforms, the :WGEN:FUNCtion:RAMP:SYMMetry command
specifies the symmetry of the waveform.
Symmetry represents the amount of time per cycle that the ramp
waveform is rising.
Query Syntax
:WGEN:FUNCtion:RAMP:SYMMetry?
The :WGEN:FUNCtion:RAMP:SYMMetry? query returns the currently set
ramp symmetry.
Return Format
<percent><NL>
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
See Also • "Introduction to :WGEN Commands" on page 998
• ":WGEN:FUNCtion" on page 1007

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English