Agilent Technologies InfiniiVision 3000 X-Series

148 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:TRIGger:TV:POLarity
<polarity> (see
page 946)
:TRIGger:TV:POLarity?
(see page 946)
<polarity> ::= {POSitive |
NEGative}
:TRIGger:TV:SOURce
<source> (see
page 947)
:TRIGger:TV:SOURce?
(see page 947)
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels)
in NR1 format
:TRIGger:TV:STANdard
<standard> (see
page 948)
:TRIGger:TV:STANdard?
(see page 948)
<standard> ::= {NTSC | PAL | PALM
| SECam}
<standard> ::= {GENeric |
{P480L60HZ | P480} | {P720L60HZ |
P720} | {P1080L24HZ | P1080} |
P1080L25HZ | P1080L50HZ |
P1080L60HZ | {I1080L50HZ | I1080}
| I1080L60HZ} with extended video
triggering license
:TRIGger:TV:UDTV:ENUM
ber <count> (see
page 949)
:TRIGger:TV:UDTV:ENUM
ber? (see page 949)
<count> ::= edge number in NR1
format
:TRIGger:TV:UDTV:HSYN
c {{0 | OFF} | {1 |
ON}} (see page 950)
:TRIGger:TV:UDTV:HSYN
c? (see page 950)
{0 | 1}
:TRIGger:TV:UDTV:HTIM
e <time> (see
page 951)
:TRIGger:TV:UDTV:HTIM
e? (see page 951)
<time> ::= seconds in NR3 format
:TRIGger:TV:UDTV:PGTH
an <min_time> (see
page 952)
:TRIGger:TV:UDTV:PGTH
an? (see page 952)
<min_time> ::= seconds in NR3
format
Table 59 :TRIGger:TV Commands Summary (continued)
Command Query Options and Query Returns