Agilent Technologies InfiniiVision 3000 X-Series

Commands Quick Reference 4
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 149
Table 60 :TRIGger:USB Commands Summary
Command Query Options and Query Returns
:TRIGger:USB:SOURce:D
MINus <source> (see
page 954)
:TRIGger:USB:SOURce:D
MINus? (see page 954)
<source> ::= {CHANnel<n> |
EXTernal} for the DSO models
<source> ::= {CHANnel<n> |
DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
:TRIGger:USB:SOURce:D
PLus <source> (see
page 955)
:TRIGger:USB:SOURce:D
PLus? (see page 955)
<source> ::= {CHANnel<n> |
EXTernal} for the DSO models
<source> ::= {CHANnel<n> |
DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
:TRIGger:USB:SPEed
<value> (see
page 956)
:TRIGger:USB:SPEed?
(see page 956)
<value> ::= {LOW | FULL}
:TRIGger:USB:TRIGger
<value> (see
page 957)
:TRIGger:USB:TRIGger?
(see page 957)
<value> ::= {SOP | EOP |
ENTersuspend | EXITsuspend |
RESet}
Table 61 :WAVeform Commands Summary
Command Query Options and Query Returns
:WAVeform:BYTeorder
<value> (see
page 967)
:WAVeform:BYTeorder?
(see page 967)
<value> ::= {LSBFirst | MSBFirst}
n/a :WAVeform:COUNt? (see
page 968)
<count> ::= an integer from 1 to
65536 in NR1 format