Agilent Technologies InfiniiVision 3000 X-Series - Search:serial:i2 S:audio

:SEARch Commands 28
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 821
:SEARch:SERial:I2S:AUDio
(see page 1138)
Command Syntax
:SEARch:SERial:I2S:AUDio <audio_ch>
<audio_ch> ::= {RIGHt | LEFT | EITHer}
The :SEARch:SERial:I2S:AUDio command specifies the channel on which to
search for I2S events: right, left, or either channel.
Query Syntax
:SEARch:SERial:I2S:AUDio?
The :SEARch:SERial:I2S:AUDio? query returns the current channel setting.
Return Format
<audio_ch><NL>
<audio_ch> ::= {RIGH | LEFT | EITH}
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:SERial:I2S:MODE" on page 822