Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

370 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
17 :HARDcopy Commands
:HARDcopy:NETWork:USERname
(see page 1138)
Command Syntax
:HARDcopy:NETWork:USERname <username>
<username> ::= quoted ASCII string
The :HARDcopy:NETWork:USERname command sets the user name to use
when connecting to the Windows network domain.
The user name setting is a common setting for both network printer slots.
Query Syntax
:HARDcopy:NETWork:USERname?
The :HARDcopy:NETWork:USERname? query returns the currently set user
name.
Return Format
<username><NL>
<username> ::= quoted ASCII string
See Also • "Introduction to :HARDcopy Commands" on page 358
• ":HARDcopy:NETWork:DOMain" on page 367
• ":HARDcopy:NETWork:PASSword" on page 368
• ":HARDcopy:NETWork:SLOT" on page 369
• ":HARDcopy:NETWork:APPLy" on page 366
• ":HARDcopy:NETWork:ADDRess" on page 365

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English