:POWer Commands 24
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 535
:POWer:EFFiciency:APPLy
(see page 1138)
Command Syntax
:POWer:EFFiciency:APPLy
The :POWer:EFFiciency:APPLy command applies the effieciency power
analysis.
Efficiency analysis tests the overall efficiency of the power supply by
measuring the output power over the input power.
See Also • ":MEASure:EFFiciency" on page 476
• ":MEASure:IPOWer" on page 479
• ":MEASure:OPOWer" on page 482
Efficiency analysis requires a 4-channel oscilloscope because input voltage, input current,
output voltage, and output current are measured.
To Next Page
Loading...
