:FUNCtion Commands 16
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 339
:FUNCtion:FREQuency:LOWPass
(see page 1138)
Command Syntax
:FUNCtion:FREQuency:LOWPass <3dB_freq>
<3dB_freq> ::= -3dB cutoff frequency value in NR3 format
The :FUNCtion:FREQuency:LOWPass command sets the low- pass filter's
-3 dB cutoff frequency.
The low- pass filter is a 4th order Bessel- Thompson filter.
This command is available with the DSOX3ADVMATH advanced math
license.
Query Syntax
:FUNCtion:FREQuency:LOWPass?
The :FUNCtion:FREQuency:LOWPass query returns the low- pass filter's
cutoff frequency.
Return Format
<3dB_freq><NL>
<3dB_freq> ::= -3dB cutoff frequency value in NR3 format
See Also • ":FUNCtion:OPERation" on page 347
To Next Page
Loading...
