Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

s1
851
Agilent InfiniiVision 3000 X-Series Oscilloscopes
Programmer's Guide
29
:SYSTem Commands
Control basic system functions of the oscilloscope. See "Introduction to
:SYSTem Commands" on page 852.
Table 123 :SYSTem Commands Summary
Command Query Options and Query Returns
:SYSTem:DATE <date>
(see page 853)
:SYSTem:DATE? (see
page 853)
<date> ::= <year>,<month>,<day>
<year> ::= 4-digit year in NR1
format
<month> ::= {1,..,12 | JANuary |
FEBruary | MARch | APRil | MAY |
JUNe | JULy | AUGust | SEPtember
| OCTober | NOVember | DECember}
<day> ::= {1,..31}
:SYSTem:DSP <string>
(see page 854)
n/a <string> ::= up to 75 characters
as a quoted ASCII string
n/a :SYSTem:ERRor? (see
page 855)
<error> ::= an integer error code
<error string> ::= quoted ASCII
string.
See Error Messages (see
page 1097).
:SYSTem:LOCK <value>
(see page 856)
:SYSTem:LOCK? (see
page 856)
<value> ::= {{1 | ON} | {0 |
OFF}}
:SYSTem:MENU <menu>
(see page 857)
n/a <menu> ::= {MASK | MEASure |
SEGMented | LISTer | POWer}
:SYSTem:PRESet (see
page 858)
n/a See :SYSTem:PRESet (see
page 858)
:SYSTem:PROTection:LO
CK <value> (see
page 861)
:SYSTem:PROTection:LO
CK? (see page 861)
<value> ::= {{1 | ON} | {0 |
OFF}}
:SYSTem:SETup
<setup_data> (see
page 862)
:SYSTem:SETup? (see
page 862)
<setup_data> ::= data in IEEE
488.2 # format.
:SYSTem:TIME <time>
(see page 864)
:SYSTem:TIME? (see
page 864)
<time> ::= hours,minutes,seconds
in NR1 format

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English