Agilent Technologies InfiniiVision 3000 X-Series - Power:harmonics:data

538 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
24 :POWer Commands
:POWer:HARMonics:DATA
(see page 1138)
Query Syntax
:POWer:HARMonics:DATA?
The :POWer:HARMonics:DATA query returns the power harmonics results
table data.
Return Format
<binary_block> ::= comma-separated data with newlines at the end of each
row
See Also • ":POWer:HARMonics:APPLy" on page 537
• ":POWer:HARMonics:DISPlay" on page 539
• ":POWer:HARMonics:FAILcount" on page 540
• ":POWer:HARMonics:LINE" on page 541
• ":POWer:HARMonics:POWerfactor" on page 542
• ":POWer:HARMonics:RUNCount" on page 543
• ":POWer:HARMonics:STANdard" on page 544
• ":POWer:HARMonics:STATus" on page 545
• ":POWer:HARMonics:THD" on page 546