:SEARch Commands 28
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 789
:SEARch:GLITch:QUALifier
(see page 1138)
Command Syntax
:SEARch:GLITch:QUALifier <operator>
<operator> ::= {GREaterthan | LESSthan | RANGe}
This command sets the mode of operation of the glitch (pulse width)
search. The oscilloscope can search for a pulse width that is greater than
a time value, less than a time value, or within a range of time values.
Query Syntax
:SEARch:GLITch:QUALifier?
The :SEARch:GLITch:QUALifier? query returns the glitch (pulse width)
qualifier.
Return Format
<operator><NL>
<operator> ::= {GRE | LESS | RANG}
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:GLITch:SOURce" on page 791
• ":SEARch:MODE" on page 780
To Next Page
Loading...
