542 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
24 :POWer Commands
:POWer:HARMonics:POWerfactor
(see page 1138)
Query Syntax
:POWer:HARMonics:POWerfactor?
The :POWer:HARMonics:POWerfactor query returns the power factor for
IEC 61000- 3- 2 Standard Class C power factor value.
Return Format
<value> ::= Class C power factor in NR3 format
See Also • ":POWer:HARMonics:APPLy" on page 537
• ":POWer:HARMonics:DATA" on page 538
• ":POWer:HARMonics:DISPlay" on page 539
• ":POWer:HARMonics:FAILcount" on page 540
• ":POWer:HARMonics:LINE" on page 541
• ":POWer:HARMonics:RUNCount" on page 543
• ":POWer:HARMonics:STANdard" on page 544
• ":POWer:HARMonics:STATus" on page 545
• ":POWer:HARMonics:THD" on page 546
To Next Page
Loading...
