Agilent Technologies InfiniiVision 3000 X-Series

846 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
28 :SEARch Commands
:SEARch:SERial:SPI:PATTern:WIDTh
(see page 1138)
Command Syntax
:SEARch:SERial:SPI:PATTern:WIDTh <width>
<width> ::= integer from 1 to 10
The :SEARch:SERial:SPI:PATTern:WIDTh command specifies the width of
the data value (in bytes) when searching for SPI events.
The data value is specified using the :SEARch:SERial:SPI:PATTern:DATA
command.
Query Syntax
:SEARch:SERial:SPI:PATTern:WIDTh?
The :SEARch:SERial:SPI:PATTern:WIDTh? query returns the current data
width setting.
Return Format
<width><NL>
<width> ::= integer from 1 to 10
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:SERial:SPI:PATTern:DATA" on page 845