Agilent Technologies InfiniiVision 3000 X-Series

328 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
16 :FUNCtion Commands
:FUNCtion:BUS:CLOCk
(see page 1138)
Command Syntax
:FUNCtion:BUS:CLOCk <source>
<source> ::= {DIGital<d>}
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :FUNCtion:BUS:CLOCk command selects the clock signal source for the
Chart Logic Bus State operation.
This command is available with the DSOX3ADVMATH advanced math
license.
Query Syntax
:FUNCtion:BUS:CLOCk?
The :FUNCtion:BUS:CLOCk query returns the source selected for the clock
signal.
Return Format
<source><NL>
<source> ::= {DIGital<d>}
<d> ::= 0 to (# digital channels - 1) in NR1 format
See Also • ":FUNCtion:OPERation" on page 347