Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

:MEASure Commands 20
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 447
:MEASure:STATistics:DISPlay
(see page 1138)
Command Syntax
:MEASure:STATistics:DISPlay {{0 | OFF} | {1 | ON}}
The :MEASure:STATistics:DISPlay command disables or enables the display
of the measurement statistics.
Query Syntax
:MEASure:STATistics:DISPlay?
The :MEASure:STATistics:DISPlay? query returns the state of the
measurement statistics display.
Return Format
{0 | 1}<NL>
See Also • "Introduction to :MEASure Commands" on page 406
• ":MEASure:RESults" on page 438
• ":MEASure:STATistics" on page 446
• ":MEASure:STATistics:MCOunt" on page 449
• ":MEASure:STATistics:RESet" on page 450
• ":MEASure:STATistics:INCRement" on page 448
• ":MEASure:STATistics:RSDeviation" on page 451

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English