To Next Page

To Previous Page

:TRIGger Commands 31

Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 911

:TRIGger:GLITch:LEVel

(see page 1138)

Command Syntax

:TRIGger:GLITch:LEVel <level_argument>

<level_argument> ::= <level>[, <source>]

<level> ::= .75 x full-scale voltage from center screen in NR3 format

for internal triggers

<level> ::= ±(external range setting) in NR3 format

for external triggers (DSO models)

<level> ::= ±8 V for digital channels (MSO models)

<source> ::= {CHANnel<n> | EXTernal} for DSO models

<source> ::= {CHANnel<n> | DIGital<d>} for MSO models

<n> ::= 1 to (# analog channels) in NR1 format

<d> ::= 0 to (# digital channels - 1) in NR1 format

The :TRIGger:GLITch:LEVel command sets the trigger level voltage for the

active pulse width trigger.

Query Syntax

:TRIGger:GLITch:LEVel?

The :TRIGger:GLITch:LEVel? query returns the trigger level of the current

pulse width trigger mode. If all channels are off, the query returns

"NONE."

Return Format

<level_argument><NL>

See Also • "Introduction to :TRIGger Commands" on page 877

• ":TRIGger:MODE" on page 886

• ":TRIGger:GLITch:SOURce" on page 915

• ":EXTernal:RANGe" on page 320

Agilent Technologies InfiniiVision 3000 X-Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 3000 X-Series