Agilent Technologies InfiniiVision 3000 X-Series

544 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
24 :POWer Commands
:POWer:HARMonics:STANdard
(see page 1138)
Command Syntax
:POWer:HARMonics:STANdard <class>
<class> ::= {A|B|C|D}
The :POWer:HARMonics:STANdard command selects the standard to
perform current harmonics compliance testing on.
• A — IEC 61000- 3- 2 Class A — for balanced three- phase equipment,
household appliances (except equipment identified as Class D), tools
excluding portable tools, dimmers for incandescent lamps, and audio
equipment.
• B — IEC 61000- 3- 2 Class B — for portable tools.
• C — IEC 61000- 3- 2 Class C — for lighting equipment.
• D — IEC 61000- 3- 2 Class D — for equipment having a specified power
according less than or equal to 600 W, of the following types: personal
computers and personal computer monitors, television receivers.
Query Syntax
:POWer:HARMonics:STANdard?
The :POWer:HARMonics:STANdard query returns the currently set IEC
61000- 3- 2 standard.
Return Format
<class><NL>
<class> ::= {A|B|C|D}
See Also • ":POWer:HARMonics:APPLy" on page 537
• ":POWer:HARMonics:DATA" on page 538
• ":POWer:HARMonics:DISPlay" on page 539
• ":POWer:HARMonics:FAILcount" on page 540
• ":POWer:HARMonics:LINE" on page 541
• ":POWer:HARMonics:POWerfactor" on page 542
• ":POWer:HARMonics:RUNCount" on page 543
• ":POWer:HARMonics:STATus" on page 545
• ":POWer:HARMonics:THD" on page 546