798 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
28 :SEARch Commands
:SEARch:TRANsition:QUALifier
(see page 1138)
Command Syntax
:SEARch:TRANsition:QUALifier <qualifier>
<qualifier> ::= {GREaterthan | LESSthan}
The :SEARch:TRANsition:QUALifier command specifies whether to search
for edge transitions greater than or less than a time.
Query Syntax
:SEARch:TRANsition:QUALifier?
The :SEARch:TRANsition:QUALifier? query returns the current transition
search qualifier.
Return Format
<qualifier><NL>
<qualifier> ::= {GRE | LESS}
See Also • Chapter 28, “:SEARch Commands,” starting on page 777
• ":SEARch:MODE" on page 780
• ":SEARch:TRANsition:TIME" on page 801
To Next Page
Loading...
