368 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
17 :HARDcopy Commands
:HARDcopy:NETWork:PASSword
(see page 1138)
Command Syntax
:HARDcopy:NETWork:PASSword
<password
>
<password> ::= quoted ASCII string
The :HARDcopy:NETWork:PASSword command sets the password for the
specified Windows network domain and user name.
The password setting is a common setting for both network printer slots.
See Also • "Introduction to :HARDcopy Commands" on page 358
• ":HARDcopy:NETWork:USERname" on page 370
• ":HARDcopy:NETWork:DOMain" on page 367
• ":HARDcopy:NETWork:SLOT" on page 369
• ":HARDcopy:NETWork:APPLy" on page 366
• ":HARDcopy:NETWork:ADDRess" on page 365
To Next Page
Loading...
